Hair clipper DSP 90478, titanium steel and ceramic blades, 4 speeds, up to 180 min., black

DSP 90478 is designed for cutting hair, trimming beards and shaping contours. Four motor speeds adjust intensity, while the side lever and 3, 6, 9 and 12 mm attachments select cutting length.

  • Titanium steel and ceramic blades for hair and beard care.
  • Up to 180 min. of cordless use per charge.
  • LCD screen shows battery charge and the selected speed.
  • USB charging with the supplied cable.

€24,00

Availability: In stock

,

DSP 90478 is a rechargeable hair and beard clipper with four motor speeds, adjustable cutting length and four attachments. It trims hair, tidies the sides and neckline and maintains beard length. Up to 180 minutes of cordless operation lets you cut wherever convenient, while the LCD display shows appliance status.

Four speeds for different cutting tasks

Speed settings of 5500, 6000, 6500 and 7000 rpm let you select motor intensity. Lower speed suits careful trimming of small areas; higher speed suits thicker hair or larger areas.

Briefly press the control button to change speeds. Hold it for approximately 1.5 seconds to switch the clipper on or off.

Length adjustment lever and four combs

The side lever selects four blade positions: 0.2, 0.7, 1.2 and 1.7 mm. This helps cut close to the skin, tidy edges and blend areas of different lengths.

The included 3, 6, 9 and 12 mm comb attachments allow longer cuts. Change attachments to trim different areas or maintain beard length. Start with a longer attachment and shorten gradually.

Titanium steel and ceramic blades

The blade unit combines titanium steel and ceramic. The clipper trims hair, beards, moustaches and sideburns. Remove the comb attachment to define contours and the neckline.

Cut clean, dry hair, taking small amounts with each stroke. Regular maintenance with the included brush and oil helps keep the blades moving smoothly.

Up to 180 minutes of cordless use

The 2000 mAh battery allows up to 180 minutes of operation per charge, convenient for a full haircut or shorter hair and beard touch-ups between charges.

A full charge takes approximately 3 hours using the included USB cable and a suitable 5 V, 1 A power supply. Actual runtime depends on speed and cutting load.

LCD screen for convenient status checks

The LCD display built into the body shows battery charge and selected motor speed, allowing you to check remaining charge before cutting and settings during use.

The elongated body has a side length-adjustment lever and a front control button.

Daily blade care

The included brush removes hair from and around the blades. Switch off, disconnect the charging cable and remove the comb attachment before cleaning. Wipe the body with a damp cloth.

The appliance has IPX4 protection against water splashes. Use the brush and a damp cloth for routine care, and regularly oil the blades with suitable oil. Do not rinse the clipper under running water or immerse it.

Package contents

  • DSP 90478 hair clipper;
  • 4 guide combs: 3, 6, 9 and 12 mm;
  • USB charging cable;
  • cleaning brush;
  • blade lubricating oil;
  • instructions.

Technical specifications

  • Power: 5 W
  • Number of motor speeds: 4
  • Motor speed: 5500, 6000, 6500 and 7000 rpm.
  • Cutting length without comb: 0.2, 0.7, 1.2 and 1.7 mm
  • Cutting length adjustment: with a side lever
  • Number of attachments: 4
  • Attachment lengths: 3, 6, 9 and 12 mm
  • Blade materials: titanium steel and ceramic
  • Battery type: lithium
  • Battery capacity: 2000 mAh
  • Battery voltage: 3.2 V
  • Cordless runtime: up to 180 min.
  • Charging time: approx. 3 h.
  • Charging: via USB cable
  • Charging power supply: 5 V DC, 1 A
  • Display type: LCD
  • Water resistance rating: IPX4
  • Colour: black
Weight 0,4 kg
Dimensions 20 × 7 × 9 cm
Brand

Type

,

Number of tips

4

Veikimo laikas, min.

180

Battery capacity, mAh

Drėgnas skutimasis

No

Galimybė plauti vandeniu

No

Water resistance

Ekrano tipas

Color

Warranty, months

24

Scroll to Top